Hello I´m sad......
![Crying or Very sad :cry:](./images/smilies/icon_cry.gif)
shift from M11-Dsss to MT-4 and today it was very sad for me:
at first my spcification
XRAY_T3- with ESC SP GT2.0 and Motor SP 5.5T -Sanwa Servo SDX-801------last week everthing was fine.
Today with MT-4 and Rx-461 mounted on the SDX-801:
after 2minutes the ESC disabled the turbo function and was flashing green (high temp) ---but it wasn´t high (43 deg Celsius)- binding again- setup ESC.
run again -same problem,
next: change the motor to 10.5T after 3 rounds -ESC turbo off-green flashing.
next action: change SP GT2.0 to HW 2.1 (it is pretty much the same ESC)3 rounds -ESC turbo off-green flashing.
change to RX-451 (from my sons also new MX-3X) same issue.
reciever was mounted on the servo, so I decide to put it on the front upper deck side.- I run for 6 minutes without problems.
So I thought, I find the solution, that it is the space between the servo and the rx...
So I change to my RX-461 (MT-4) reciever and put it on the same place.
AFTER one straight the same disfunction as the last 2 hours :confused:.
shift back to RX-451, also on the same place- but now, same issue- no turbo, green flashing etc......
completly devastated I but all my thing in my bags and went home........
![Crying or Very sad :cry:](./images/smilies/icon_cry.gif)
Is there some things what I forgot to setup on the MT-4 , failsafe or what????
PLEASE, can some of you help me
I do this hobby 28 years and also I have done some champion ships here in AUSTRIA (VIENNA) , BUT It was my darkest day ever today....
![Crying or Very sad :cry:](./images/smilies/icon_cry.gif)
best regards
Harald
greetings from Vienna.