New T3 Geardiff installed

Pigiolino · **Joined:** Tue Sep 28, 2010 22:51:05 **Posts:** 74

Arrived and installed. Someone has already tried this item?
It is noticeable improvement in driving than SPEC R?

Bye Pier

Bytestream · **Joined:** Mon May 02, 2011 20:27:54 **Posts:** 46

Your probably one of the first people to get this item outside of team drivers, so .. the big question is ..

Does it leak?

Pigiolino · **Joined:** Tue Sep 28, 2010 22:51:05 **Posts:** 74

Mounted yesterday, seals and OR are perfect.On weekend I will use on the asphalt track.
Pier

Marek Gadomski · **Posted:** Tue Jul 19, 2011 22:18:35

i drived about 9 legs and no oil leak and works smooth, it's lighter

romuald31 · **Joined:** Wed Jan 05, 2005 14:21:25 **Posts:** 78

Hello from France,

the XRay gear diferential is great.
The gears are made from a good nylon, the axles cross too.
The outdrives are made from treated aluminium.
The sealing is operated with flat-paper seal and an O-Ring.

Here's some weight about the T3 transmission...

The spool:

The ball dif:

The SpecR gear dif:

The XRay gear dif:

Front and rear difs in my car.

Au revoir.

Stanley Bąk · **Posted:** Tue Jul 19, 2011 23:07:07

do you see any big difference in drivin' beetwen spec r's and xray's diff?

nevergiveup · **Joined:** Fri Jan 07, 2011 01:56:22 **Posts:** 2

Stanley Bąk · **Posted:** Wed Jul 20, 2011 13:41:33

ok,thanks!

flo0206 · **Joined:** Mon May 09, 2011 09:56:51 **Posts:** 38

i'm a noob to racing. have been practicing the last 3 month. after kicking out the ball diff on saturday i put in the gear diff with 700cts oil in rear. tight small track with low grip. PB was set 1.2 sec lower than before and much more consistant

i love it -it helped my driving :lol:

Mark Christopher · **Posted:** Wed Jul 20, 2011 20:22:23

mbmodels in leeds UK has stock if you carnt find one, got mine today

sidecarphil · **Posted:** Wed Jul 20, 2011 21:21:01

Stanley Bąk · **Posted:** Wed Jul 20, 2011 22:21:59

sidecarphil · **Posted:** Wed Jul 20, 2011 22:54:44

you need to sand the smaller half of the diff housing before adding the gasket , this makes sure the cases are flat ,and use some good grease on the X rings then it wont leak from the outputs either , i got 2 with oil in them and neither leak , 1 also with puty in it ;0

xtaiji · **Joined:** Fri May 13, 2005 15:59:45 **Posts:** 1

I just put a new gear diff, but it's too tight with 52mm.

They said "Fits both 50mm & 52mm drive shafts."

Rear arms do not move freely.

flo0206 · **Joined:** Mon May 09, 2011 09:56:51 **Posts:** 38

Marek Gadomski · **Posted:** Thu Jul 21, 2011 21:17:32

sidecarphil · **Posted:** Fri Jul 22, 2011 07:30:18

Mark Christopher · **Posted:** Fri Jul 22, 2011 10:03:09

spike8625 · **Posted:** Sat Jul 23, 2011 03:27:08

sidecarphil · **Posted:** Sat Jul 23, 2011 08:33:14

XRAY - Model racing cars

New T3 Geardiff installed

Who is online