Joined: Sat Jun 18, 2005 12:48:40 Posts: 1357 Location: Windsor, UK
|
If you look closely at the diagram where those numbers are, the arrow points to just in front of the wishbones. I read those numbers as how many mm of shims are in front of those wishbones.
If like your example, there is an X above the 0 then there are no shims in front of that wishbone, if there is an X above both 1 and 2 then there are 3mm of shims in front of the wishbone.
I think putting an X above 0 as well as 1 or 2mm is a mistake though.
|
|