Headz

XB8Boy14 · **Posted:** Mon Jan 03, 2005 05:09:30

Does enyone know were I could go that would have heads for the Medial M2K Pro????

z-man · **Posted:** Mon Jan 03, 2005 06:22:41

they say to stay w/ the stock one that is what id use. you will change the emissivity and get a wrong reading on the temps. unless you change it on your temp gun. i found this out the hard way. its just best to stay w/ what the motor was made with. IMHO.

XB8Boy14 · **Posted:** Tue Jan 04, 2005 05:25:15

Giorgi50 · **Posted:** Fri Feb 11, 2005 20:29:08

yosi · **Posted:** Sat Feb 12, 2005 00:39:06

pbfoot · **Joined:** Mon Sep 13, 2004 03:06:20 **Posts:** 157

z-man · **Posted:** Sat Feb 12, 2005 15:06:43

pbfoot · **Joined:** Mon Sep 13, 2004 03:06:20 **Posts:** 157

yes the polished ones do give false readings but good ones like o'donnell or nocer give accurate readings

team lobo · **Posted:** Sat Feb 12, 2005 23:04:13

Emissivity doesnt matter. You shouldnt be tuning to temperature anyway. You should only use temperature as a guide. Tune your engine for performance and take the temperature, it doesnt matter if it reads 5-10 degrees lower or higher, just remember what it reads for that motor. I have a CMB EVO2 that runs great between 180-200F on my gun. Another engine may run great at 280F, as long as you use the same gun and have a reference for what your engine runs well at, thats all you need.

bottom line: tune motor for performance, use temperature only as a reference and only use your tempgun.

Giorgi50 · **Posted:** Mon Feb 14, 2005 20:28:18

XB8Boy14 · **Posted:** Wed Feb 16, 2005 03:38:39

Giorgi50 · **Posted:** Wed Feb 16, 2005 08:06:15

XRAY - Model racing cars

Headz

Who is online