XRAY - Model racing cars

Hello guys,
thank you in advanced for yours reply

So, I assemblied on my t3 the alu-drive adapters on the front, using ECS drive shafts 52mm long.

Would be better to use 50mm long or is it the same think?

I know that the 52mm long are better than 50mm on the carpet track for example, following instruction info.

Bye.

Zak,

You will have faster direction change with 50mm driveshafts and little bit more turn in. 52mm driveshafts are more smooth to drive.

Teemu

Thank you very much Teemu

I'm trying the 52mm long on the track carpet, unfortuntely with some braking problem...but I think that the problem could be the screw of the tyre nut too much long....