XRAY - Model racing cars

Hi, I am the happy owner of an Xray XII Link car. But I have too much grip as the car overturned in the turns. The problem is that the car overturned when you give the car more steering out of corners. I\'ve highlighted the top wishbone to the max to see if it could alleviate. But no luck.
Have some ideas?

Mvh Anders Lind

Hey Anders,

could you help us to help you and give more information

1) What is about the front toe in - too much is not good
2) are you using additive
3) can the rear work freely
4) what is your ride high - front+ rear ?
5) what is your camber and caster setting in the front


best regards

Harald

greetings from Vienna

Hi Harald,
I have 1 degree toe in.
I use CS High Grip. 1 / 4 before 10 min. before and 4 / 4 behind 20 min. before.
I've spent an enormous amount of time to get bagvogn to work accurate, current and tweek that is okay.
I am running with 3.5 mm in front and behind
Camber 1 degrees
Caster 5.5 degrees
Tire size 41mm front and 44 rear

Hope you can help me.

regards Anders Lind

hmmmmmmmmmmmmmmm..

sounds good

is this "overturning" after eg. 5 or 6 minutes.
Or is it from the begin on- in the very first round?

All the settings look good.
But what about your diff ? Is it in perfect condition ? Perfectly smooth and regularly rebuilt/greased ? Bad action or if too tight, your car will oversteer specially on tight corner exit.