XRAY - Model racing cars

HI
It says only use them with the symbol upwards,so if you use them with the symbol up then alter it so it is turned the other hole do you have to swap them from side to side to keep the symbol up,if so why do you have to keep them symbol up?
Thanks

Hi,

for the L and H roll centers, only position 3 (according to manual) should be used. The other holes are for roll-center #303032. Please see manual page 18. It is explained there

Hi all guys, i'm from Italy.
I was looking for info about quick roll center specially about L and H.
Ok Martin this is clear but in your Kastellaun setup is there a mistake? At rear end it is marked H quick roll centers and they are marked position 4. Only 3 is allowed, right? And what about camber link location? 1 or 2?
Tnx!

Hi
What is the difference between the h and the L holders if used on the same position on tower and hub and just the holders changed what would it change between them?
Thanks