XRAY - Model racing cars

Hallo
I have an 808 2010 spec with 3 bearing pinion, after 1 race both front and read bearings was dead. also front diff housing. I want to know if warranty covers that?

Thanks

hi,

can one mount the 10t pinion of a xt8
in the xb8 bulkheads with 808 gearing ??

Yes if you have the 43T diff gears (or 41 overdrive).

Hello, I'm new to this forum, I would like to know where I can find a document that tells me that the cams are used in the optionals # 353303 and # 352303 in which degrees are the same, thanks

Where would I be able to get a blank modifiable setup sheet for the 808 or 808e that I can track my changes with?

hello
im wanting to no if there is a fix for the EP 808 engine mounts bending snapping, now before u think that my car has to much flex thats not the case, everything is correct and i think there is a problem i refuse to pay another $50 for my 3rd engine mount, pls help me xray, i race ur GP xray 808 for over two years now i love the car, i race at a high level in australia , so i know what im doing,
i will show u some pics, now i no other people have dont the same thing
the way i see it is the engine mount has a jodb to do and its not doing it , losi hyper ect dont have this problem

i thing xray should replay the mount for me

many thank pls help

I am searching for the shock length of the front and rear shocks on the 808B. I assume everyone measures at the same points - center of top hole to center of bottom hole?

Mostly, I'm looking for a set of 4) shocks that are 97mm in length.

808 is 104mm Front and 114mm Rear. You could use 4x 808 front shocks but they wouldn't compress as much as a bit shorter ones.

Hi,

does anyone have the part no. for the new 2011 spec silicone shock o-rings? It's said at track that they are much better sealing and the shocks are running smoother.

Thanks.

Hello,

please could anybody at Xray check the 1-piece engine mount for Sirio based engines? The truth is that the ones for Novarossi based engines do not fit Sirio based engines without tension. So please check the ones for Picco based engines on a Sirio based engine to see if it fits as it should. Novarossi and Sirio have never ever been the same distance for mounting.

I bought the ones for Sirio as stated by Xray but they don't fit as said.
Would be nice to have that cleared.

Thanks.

Just in case you think it's not worth to check this matter ...

From Kyosho:

FMW-30
SIRIO

FMW-31
NOVAROSSI

Hey guys at Xray ... that's not a joke! I'm serious! Hard to believe that there's no Sirio based engine around at the Xray facilities ... take a Werks, Sirio, Orion, Siim, Nvision ... whatever you want to try.

Ok. It seems that Xray can't take advice on own mistakes! I'll consider that when choosing my 2012 cars!

Green Wing: I use to run with those based engines and I used 358718 1-piece motor mounting. This fit perfect for me.

Teemu

I have a Werks B5 in my 808 buggy and use the 358718 mount and have no problems with it

We also run The B5/B6 in the 808 with the same mounts and i know of a racer who ran a sirio in his 808 09 and 10 spec on the same engine mount.

stupid question, but I have to ask...

do we run the diff gears dry, with no ep grease? instructions show ZERO grease, just wanting to confirm

JG