XRAY - Model racing cars

Hi Foxy,

What distance would you like to have between the body posts?

I think John can answer that better. He has made some up for his X10 and had them on his CRC's. I've never had any

Thanks for looking into it Marin

Can you please ask him or tell him to post the answer? Thanks

thanks

what spring hardnesses do you use on the central and side shocks?

Martin

The distance from the centre of the Rear Body Post Mount Hole to the centre of the extension Rear Body Mount Hole is 27.5 mm.

I attached a picture of a Protoform WGT Body showing that this modification moves the body mounts to the top of the rear fenders.

I've mounted the latest CRC Bladder Centre Shock in ordered to have a variety of centre springs. I'm running the CRC Springs - Copper which is very firm, Silver or Red. It would be great if you could offer a selection of firm springs for the Xray Shock.

Side Springs - I run the heaviest CRC Purple Springs on my 2 cell car and CRC Red on my 1 Cell Car.

I noticed that some of your 12th scale team drivers have removed material from the top of the Steering Block in order to lower the upper arm. Perhaps XRAY could offer optional Steering Blocks with this modification.

Thanks for listening.

Another picture

John,

I see on the picture that the graphite post holder that you make has extra 3 holes. Do you use all of them?

I don't use the other holes on the Protoform or HPI Bodies. The extra holes were already on the graphite pieces I used.

At some point, it would be helpful to have a X10 Link Setup Sheet that we can enter our setups to share data. I know that we can used the 12th scale sheet, but if it is not too much work, a X10 Link Sheet would be appreciated.

I'm enjoying my X10s and I'm just finishing up my new XII Link.

Have a great day.

Ok, I will do the set up sheet as soon as possible. Now I have so many races in front of me.

Thanks

Martin, we appreciate you looking into these items for us