I am after a bit of set up advice please. I'm running a 009 with the 38t pulleys and ecs driveshafts i race on an technical indoor carpet track 24m x 12m my car is set up as per the carpet / rubber set up in the manual. I'm running a Tekin rs and a redline 13.5t motor and fdr 7.9. The problem i've got is if i set the Tekin up on conservative settings the car is on rails and handles really well. As soon as i add a bit of extra punch and some timing for speed the car is all over the place mainly corner exit on power the back end just lets go and the car oversteers really bad. The diff has been rebuilt and is set up fine and is very smooth, the shocks have been rebuilt and have no air in them. I completely stripped the car and replaced some slightly bent hinge pins and all bearings. It just can't handle the extra grunt from the lively settings any ideas where to start please as i'm fed up with MI4's with Speed passions out handling me
![Confused :?](./images/smilies/icon_confused.gif)