XRAY - Model racing cars

Wondering what would be a good clutchbell freeplay/gap for the 808? I know it's not as critical as onroad, nevertheless.

I like to have it around 0.7mm. This might seem a lot, but it works and haven't had a clutch failure for 2 years! I replace the clutchbell 5x10x4 bearings quite often (1-2L) and use the old ones as onroad touring car wheel bearings - nice and free spinning

One sign of too little play is distorted or broken/missing adjustment shims! Another and more noticable is clutchbell bearing failure So if you see missing or broken shims then you've been probably running too tight.

WOW... Cheers lauri.. never thought it'd be that much.