808 2010 problem?

cornish boy · **Posted:** Mon May 10, 2010 21:34:26

hi guys
i have recently built up my 2010
using the aluminum hinge pin holders both f and r
and i it looks to me
like the rear end seems to raise at the front and does not look right
any ideas?

cheers
jordan

Quietman · **Posted:** Mon May 10, 2010 22:11:12

You have to use the other ones the r2 blocks or dremel the chassis slighty

cornish boy · **Posted:** Mon May 10, 2010 22:21:16

hi mate can you define OTHER ONES
plastic standard
or is there another set of alu
ones for the 2010

Bren Ralls · **Posted:** Mon May 10, 2010 23:09:33

The 0-2 anti squat plate will not fit the 2010 car, it fouls the chassis & lifts the gear box of the chassis. You can grind the chassis to make it fit but find ourselves running in 2 deg postition most of the time now.
Run the 2-4 anti squat plate & run in 2 deg position, it will look close & will look as if the gearbox is lifted, just remove the wishbones & you will see all is fine.

cornish boy · **Posted:** Mon May 10, 2010 23:34:53

cheers
i will try that tomorow

XRAY - Model racing cars

808 2010 problem?

Who is online