XRAY - Model racing cars

Contact your hobby shop or national distributor and order #355113 XB808 PINION GEAR FOR 3 BEARINGS - 10T (2x) and #352077 XB808 ALU BEARING COLLAR FOR 3 BEARINGS (2) (1x) + you have to use #931320 BALL-BEARING 13x20x4 (2)

OK Bren I accept that the kit as supplied will only fit 2010 bulkheads but as the internal diameter is still 13mm so long as you get two 13x19 shims made to the same thickness as the 13x20 ones then the pinions will fit with three 13x19 bearings in 2009 bulkheads. The current 2009/2010 bulkheads run exactly the same pinions just the 2010 bulkheads are 1mm bigger internally to take the larger bearings.

Incidentally you say above that there are 2 shim collars in a packet and you need only 1 packet( if I read it right anyway)..I previously understood there would be 2 x 13x20x0.75mm shims front and back...ie bearing-shim-bearing-shim-bearing so if this is the case you will need 2 packs..1 front one back.

Mr Ralls, what do you think of the 1.3x8 shock pistons? Also a little info on shock setup would do us all some good. Like oil thickness verses packing,those sort of things.

cheers bren....posted you an apology on the other thread so won't repeat it here..didn't mean to sound like i was having a go at you..sorry

Bren I would like a clarification on the pinion bearing problems.
Are the complaints of the original 2010 20mm pinion problems as numerous as they were on the first 08 cars?

Or just people being louder & x-ray being more proactive on a updates?

will xray be supplying the kits with the 3 bearing pinion as standard from now on then?