XRAY - Model racing cars

Is where I bought mine. They seem to have all the parts to support the kit too. THe added bonus is that you get reward points for the money you spend that can be used later for discounts or dollars off your purchase.

I am also aware that one of the Team Drivers here also runs RC America. Hopefully he will chime in here and speak for himself on what all he can do for you. But it is my understanding that he (RC America) is the head-honcho when it comes to Xray America and getting the parts you need.

As for upgrades it might depend on what year the XT8 you bought is. 09 brought about some upgrades in the kit but not knowing what all you have its difficult to tell you what to get. Id make sure you have a GOOD Servo set. NOthin like watching a fella run silly after his $600 kit with a $50 servo in it that has went rougue. And a big battery for those good servos.
The only other option I could see that I thought I might want was the I.S.S. Suspension kit and the flat-spotted CVD pins.
If you don't have one, the Hudy set-up station will likely be THE best thing you could purchase to help you with your Truggy. Be sure to drop the extra $40 and get the Truggy Toe-plate.

Don't Quote me, but I "think" Mark Twian Hobby is St. Charles Mo. might either carry or would get you xray parts. The guy in South county has a chip on his shoulder with Xray and wants nothing to do with them or their products......OR team drivers for that matter. I was shocked to hear what he had to say....(I saw you are from Missouri; I'm ten minutes or so East of StLouis proper.)

Anyway good luck with your XT8.

I got the buggy, not the truggy btw. But thank you! I will definitly look for the setup station.

And i would love to hear from the guy who owns RC America

As for servos, i have an Airtronics 94258 and a Futaba 9350... will those suffice?