XRAY - Model racing cars

ok so i put every suggestion you guys made on my car and just ran it. The difference in handling compared to my usual kit set up was like night and day. the rear stayed planted when switching direction on the tight circuit. It almost feels like the rear is slow to rotate but in a good way. i won the A main for the first time in 18 months running there i was over the moon.

during the meeting i started suffer a bit front end with under-steer this could be down to not enough time between heats to let additive soak in. changing ackerman positions helped a bit but basically i want the car to turn tight and not push. because as you can see it is really tight bigger than 1m though its about 1.5 haha.

Now my mate tried my set up and immediately improved but another guy who runs a 009 runs +75 front and 0 rear and his car looked really good. i beat him in the final but it wasn't easy. so i may try this next week aswell. whats your opinions on this thanks for the help

nice to hear that you like the set up

what do you mean by +0.75? offset or roll center?

btw, congratulations

i have a good set up for a low grip carpet



i had loads of rear grip and pushing the front on , so i switched to the HPI gold / silver springs , and that fixed it

i lead that B final ( lot of sponsered divers there) for 5 mins till i made a silly mistake and got stuck under the boardings