XRAY T3 ---- General Forum

taz5176 · **Joined:** Fri Jan 14, 2005 12:04:39 **Posts:** 38

as i mentioned before, a little sanding & ca on the edges of the chassis prep it nice. just completed my build without any other issue except for 1 of the servo saver bearing is too big. went down to my lhs for exchange. lucky my lhs stock some bearings, simple exchange solve the problem, NICE!

i also pick up a ip lipo (5000mah, 20c), looks good & fit real nice, with lots of space

anyone knows how this lipo compares against the new lrp lipo?
if ip cells are good, might get a couple more

taz5176 · **Joined:** Fri Jan 14, 2005 12:04:39 **Posts:** 38

1 other thing, notice that the rear hub with default 4mm shims is way too high, abt 1mm or less clearance from rims. i check my friend's t3 run with 4mm shims at rear, indeed the rims rub onto the screw. but my friend said run is good, nothing abnormal.
is having 4mm shims normal?

mario · **Posted:** Sun Nov 15, 2009 18:41:06

The problem with the not properly machined thread on the anti-roll bar ball ends was noticed and production is aware. Next batch will have each thread manually inspected and the set screw will be mounted in the ball end to ensure the thread is machined properly. Sorry for the troubles, please contact your distributor who will immediately replace any of those ball ends. Thank you for providing the feedback.

Martin Hudy · **Posted:** Mon Nov 16, 2009 09:29:35

gabrydamon · **Joined:** Fri Mar 21, 2008 09:24:27 **Posts:** 7

taz5176 · **Joined:** Fri Jan 14, 2005 12:04:39 **Posts:** 38

dadaman · **Joined:** Tue Jun 20, 2006 03:07:36 **Posts:** 25

salo · **Posted:** Mon Nov 16, 2009 15:27:19

Gone Racin · **Posted:** Mon Nov 16, 2009 17:49:13

20 SMOKE · **Posted:** Mon Nov 16, 2009 18:38:14

way to go Ron,see you guy at minnreg

Gone Racin · **Posted:** Mon Nov 16, 2009 19:45:02

Thanks, Yeah we will be there on the rug.

gameover · **Posted:** Mon Nov 16, 2009 21:52:41

dadaman · **Joined:** Tue Jun 20, 2006 03:07:36 **Posts:** 25

nnick · **Posted:** Tue Nov 17, 2009 12:44:11

ockevin · **Joined:** Thu Jun 30, 2005 06:44:00 **Posts:** 3

Gone Racin · **Posted:** Tue Nov 17, 2009 23:37:10

lowcel · **Posted:** Wed Nov 18, 2009 14:27:29

XRAY - Model racing cars

XRAY T3 ---- General Forum

Who is online