Thanks simon for the input, always nice to see what other people think of things. Yes i do understand exat what you mean
I have come up to this. The car feels much harder with trued NT foams then Xray orginal foams, like Woodboard.
I finaly did find the perfect combine...i want the Xray foams "softer" "More foam profile" BUT the NT 1/10 diameter. We are some guys that have tired this, and we used to run NT foams, but they are outperformed bigtime.
Andersons MB4 Buggy rim
JACO 1/12 donuts.
This combo only needs to trim down a few mm, i run mine in 55mm no trimed rims at all.
The car working ace on higspeed tracks, and takes the jumps really good! This setup is real easy to drive. thanks to the "more foams" on tires
This is my setup. i have went from 1000w xray oils and 7/5mm internal limiters to this
Offroad, Big jumps, fast straights, quick chikanes etc...
Track Type Description:
+Front+
Shocks: Alu
Shock Oils: 700w
Pistons: 2
Spring: Anderson MRX4 Yellow hard
Preload: 2mm
Internal Droop Spacers: 0mm
Shock Angles: (alu tower,arms just under level)
Shock angle bottom arms: Outer
Shock angle top tower: Middle
Toe In/Out: 1in
Swaybars:
Sway Bars: On
Sway Bar MM thickness: 1.5mm
Tires: Foam
Compound/Type: Jaco / Aqua
Dimensions: 55mm/21mm
Traction compound: Carpetjack
CA:
Micell: front diff hard
+Rear+
Shocks: Alu
Shock Oils: 700w
Pistons: 2
Spring: Black medium
Preload: 6mm
Internal Droop Spacers: 0mm
Shock Angles: (Alu tower)
Shock angle bottom arms: Outer
Shock angle top arms: 3rd from top
Toe In: 1 in
Swaybars: Yes
Sway Bars: On
Sway Bar MM thickness: 1.4
Tires: Foam
Compound/Type: Jaco/Aqua
Dimensions: 55mm/21mm
Traction compound:Carpetjack
CA:
Micell: middle diff
+Chassis+
Weight Balance or layout: Motor,Esc and servo on rightside, Rx on front left with battery RHINO 1050 + 20gram led.
Micell: Xray M18T Pro
+Electronics+
Motor:eZrun 7800 rpm/v
Gearing:Stock/16T
Specifics Notes:Alu rear and front carriers - NT hex - Alu towers - XXX4 wing mount. Using M18T Pro parts on the truck. BJ4 lid | Andresson MB4 Buggy rims, shrouded with JACO 1/12 donuts...