XRAY - Model racing cars

yes, coming soon. I was testing it and it works great

Ok thank you.

@ ncalenda

the biggest difference is that it's smaller so lighter then the stock clutch.
It looks a bit like the Serpent WC clutch which is very good as well.
(I currently use the serpent one on my NT1)

http://orange.ap.teacup.com/applet/stc_mania/archive









Just a same type clutch with a wider clutchshoe support disc and 2-way mounting flyweights.

smaller diameter....

Is the clutch wheel interchangeable with the old one?

I like the black shoes, gives option on the mounting direction, Good!

Martin I have used the High Dynamic this week on a low traction surface but the problem I had was the car pulled off really slow, seemed to take a long time to build up.

I tried moving the preload spring to nearly end of thread still nothing, also noticed endplay seemed to be excessive, not too sure if that caused my shoe to have excessive wear.

Here are some pics





Assistance please guys

The nut is too tight, the clutch slips too much i think.

I found the spring very hard (which is good). But i think the normal 10-11mm default is a bit optimistic. i think i used mine on 10.2 or something, while normally i had 10.8.