What Glue for the Carbon Fibre sealing

NickB · **Posted:** Wed Apr 22, 2009 00:37:59

Hey folks!

Just wondering what glue youd reccomend for sealing the carbon shock towers etc!? e.g. specific make you found to be better e.g. doesnt crack off!

Thanks in advance,
Nick

omarwashington · **Posted:** Wed Apr 22, 2009 01:19:53

use Thin ca glue

I use Pacer Zap ca glue good stuff, I put about 2 or three coats on the carbon fiber

Butcher · **Posted:** Wed Apr 22, 2009 03:15:40

Pretty much any thin or med glue ment for our tires will work well.Make sure you sand the edges first just a bit fine paper works the most effficent like 400 grit or so.Few drops at top corner & let it run down to bottom corner then rotate part for next run.If your having it chip off,you've put it on too thick.Your goal is not to make a bumper around it just a light coat to keep the microscopic fibers from fraying & absorbing fluids thats all.

NickB · **Posted:** Wed Apr 22, 2009 11:01:47

Oli · **Posted:** Wed Apr 22, 2009 11:29:06

NickB · **Posted:** Wed Apr 22, 2009 19:14:46

Butcher · **Posted:** Thu Apr 23, 2009 05:23:58

HulkRay · **Posted:** Thu Apr 23, 2009 05:53:02

anf0 · **Posted:** Thu Apr 23, 2009 08:48:06

XRAY - Model racing cars

What Glue for the Carbon Fibre sealing

Who is online