XRAY - Model racing cars

I understand how to balance my T2'008 from side to side (left to right) but how do you balance it from front to back?

by adding extra weight into a car. You can change the weight balance also by moving front and rear arms more forward or backward.

Sorry, I asked the wrong question. The Hudy balancing tools show how the car leans from one side to the next based on weight distribution. How do you test if the car is balance from front to back? are there some kind of pinholes on the chassis that let me test balance from front to back?

thread hi jack alert:

What is a common weight of a 6 cell battery i am attempting to balance my t2009 by hand untill my hudy balance pins arrive there currently on bac order

my lipo is 230g whats an average battery wiegh at? what weight are these T2 designed to run with on the battery side, does anyone know... from the top of my head i feel 400 but i really cant be sure.

if i can find out the weight of an average battery then the least i can do till my pins arrive is bring the lipos up to standard battery weight.

Try around 70-80 grams, thats what i did last race. Worked out quite well!

Ronaldo, just lift the car on two hex drivers (or other small diameter tools) from the center of shock towers. Eyeball it center or measure and file a little notch in the center of the towers. You'll see the left-to-right balance very easily using this method and no extra tools needed.

What's the minimum allowed weight where you drive? When balancing the car don't go over the minimum weight limit too much... Fortunately the Xray T2 is quite light and usually there's no problems like with some other cars

PS. From Asia you can order small accurate digital scales for about 10-15$ a piece to do the balancing "the right way".