XRAY - Model racing cars

Give more info. Linkage of steering not binding, What diff you're useing, gear or ball. What are your toe-in/out frt & rear, Servo finding home at neutral?

I am having the same problem with mine.
It seems to be going straight, then i steer and it goes off to one side, then sometimes off to the other side.
Happens with new and old tires. m18t pro is very new. It does make it very hard to drive at speed.

That might be your servo. What servo are you using on it? Some can loose their center and start drifting.

Ok,
I have run the bats down then decided to try to sort out this steering problem.
Things i changed/want to change:
1) The front ball diff was a little looser than the back so i have tightened the front so it is tighter. (how tight should it be? i can spin the wheel by holding the gear and one wheel but its quite tight)
2)I have changed the toe, on the rear, i have lowered it and matched it up better (one side was a bit more than other).
3) The front has a little toe (other direction though), but very little.
4) The front wheels tip down a little but this can't be adjusted, is this ok?
5) I am thinking of getting a decent servo for this, so what is a good digital servo? I want something very reliable and good quality.

I am going to get a 2-cell lipo for this and can't wait. Any you can recommend?

Sorry for taking over the thread a bit.
Thanks for all the help guys

I have run it since these changes and its a lot better.
Still goes off to one or the other side, so will try a new servo.
Which one?


Happy xmas