XRAY - Model racing cars • View topic - 808 Design problem- Diff pinion gear bearing stress

View unanswered posts | View active topics

Board index » XRAY KITS » XRAY XB8 | XT8 | 808E | XB9 | XB9E | XT9

All times are UTC + 2 hours

808 Design problem- Diff pinion gear bearing stress

Moderator: ChrisP

Page 3 of 6

[ 110 posts ]

Go to page Previous 1, 2, 3, 4, 5, 6 Next

Print view

Previous topic | Next topic

Author

Message

Andy Taylor

Post subject:

Posted: Fri Sep 05, 2008 02:33:55

Joined: Mon Jun 05, 2006 18:09:49
Posts: 281

Top

Tank time

Post subject:

Posted: Fri Sep 05, 2008 03:28:47

Joined: Thu Oct 25, 2007 03:54:44
Posts: 316
Location: Australia

Top

daveg

Post subject:

Posted: Fri Sep 05, 2008 10:07:33

Joined: Fri Sep 29, 2006 12:49:08
Posts: 220
Location: uk

Top

Andy Taylor

Post subject:

Posted: Fri Sep 05, 2008 16:02:37

Joined: Mon Jun 05, 2006 18:09:49
Posts: 281

Top

zieluch

Post subject:

Posted: Fri Sep 05, 2008 17:22:21

Joined: Mon Jun 13, 2005 22:05:17
Posts: 68
Location: poland

Top

kjuliussen

Post subject:

Posted: Sat Sep 06, 2008 10:07:50

Joined: Tue Nov 29, 2005 00:38:15
Posts: 14

Top

Tank time

Post subject:

Posted: Sat Sep 06, 2008 11:18:03

Joined: Thu Oct 25, 2007 03:54:44
Posts: 316
Location: Australia

Top

daveg

Post subject:

Posted: Sat Sep 06, 2008 12:23:04

Joined: Fri Sep 29, 2006 12:49:08
Posts: 220
Location: uk

not for those on the old shafts its not...altho im on the old ones and no problems,go figure.

Top

HVoltage

Post subject:

Posted: Sat Sep 06, 2008 21:44:35

Joined: Sun Apr 10, 2005 21:45:15
Posts: 97
Location: Finland

After 127 min race driving (includes two national level races, no training) ... Maybe Avid holds it better ...

Top

Keyser-Soze

Post subject:

Posted: Sat Sep 06, 2008 21:55:06

Joined: Tue Apr 22, 2008 01:44:35
Posts: 96
Location: Portugal

The only thing that will stop that is the aluminium chassis braces,avid's are not going to be the solution,they will break as well,that's not only the bearings fault,because the car has much flex and with the amount of flex breaks bearings,most part of them on the rear,but the front as well,in my opinion the way to ride the 808 without bearings problems would be the aluminium chassis braces on the car,front and rear,but to not loose some flex,the other solution is using the carbonite A-Plate with front composite chassis brace,because the composite A-Plate will take some flex,and aluminium chassis brace on the rear....!
It's my opinion,my 50 cent...!

Top

daryl denny

Post subject:

Posted: Sat Sep 06, 2008 23:01:53

Joined: Thu Mar 10, 2005 16:15:33
Posts: 118
Location: Richmond, Ontario, Canada

Top

low10s

Post subject:

Posted: Sun Sep 07, 2008 06:10:18

Joined: Fri Oct 21, 2005 03:49:00
Posts: 328

Top

HVoltage

Post subject:

Posted: Sun Sep 07, 2008 09:14:36

Joined: Sun Apr 10, 2005 21:45:15
Posts: 97
Location: Finland

Top

lauri

Post subject:

Posted: Sun Sep 07, 2008 15:45:23

Joined: Fri Dec 28, 2007 16:16:47
Posts: 395
Location: Estonia, Tallinn

Top

Itsallnillusion05

Post subject: bearing issue

Posted: Sun Sep 07, 2008 16:06:28

Joined: Thu Sep 04, 2008 03:46:40
Posts: 6
Location: Houston

Top

Itsallnillusion05

Post subject: bearing issure

Posted: Sun Sep 07, 2008 16:12:00

Joined: Thu Sep 04, 2008 03:46:40
Posts: 6
Location: Houston

Top

Keyser-Soze

Post subject:

Posted: Sun Sep 07, 2008 19:51:55

Joined: Tue Apr 22, 2008 01:44:35
Posts: 96
Location: Portugal

Top

Itsallnillusion05

Post subject: bearing issue

Posted: Sun Sep 07, 2008 22:02:55

Joined: Thu Sep 04, 2008 03:46:40
Posts: 6
Location: Houston

Top

Keyser-Soze

Post subject:

Posted: Sun Sep 07, 2008 22:07:19

Joined: Tue Apr 22, 2008 01:44:35
Posts: 96
Location: Portugal

Top

Andy Taylor

Post subject: Re: bearing issue

Posted: Mon Sep 08, 2008 00:31:47

Joined: Mon Jun 05, 2006 18:09:49
Posts: 281

Top

Page 3 of 6

[ 110 posts ]

Go to page Previous 1, 2, 3, 4, 5, 6 Next

Board index » XRAY KITS » XRAY XB8 | XT8 | 808E | XB9 | XB9E | XT9

All times are UTC + 2 hours

Who is online

Users browsing this forum: No registered users and 39 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum