XRAY - Model racing cars

hi guys i need help !!
my car is alway's doing traction roll the track carpet track tight but fast!
and the t1 fk is my newest ride !!
here is my set-up
purple 33lbs frt spring 3 hole piston stk postion link or frt shk
-1.5 deg camber frt/rear
sorex 24 hpi med insert frt
sorex 24 hpi soft insert rr
white 17.5lbs 1 hole piston stk link position but shk 2 hole top shk
position inside
i have tried droop without success and my ride height is
frt 5.5 rear 5.5
not shure but i want to try sorex 27 med insert or hard!!
thanks!!
Pete68

try 5 mm front and if the backend is too planted lower that to 5mm too.

my t1 used to traction roll when it was that high, i think

up the dampening if poss, I would then follow all setup guide to limit camber rise change and to have more stability.

Although that does sound like the tyres are digging in

What sort of point in the corner is it doing this ? wheres the weight at the point of roll

i caxn say in every corner i c'ant drive fast in the corner it's alway's doing traction roll !!
it's a tight technical track road course!
Pete68

Pete,

This is a winning setup for our track (based on Martin Hudy's setup)


Give it a try!!

Jon

Pete, have a look at this: . I think it will provide you with the info you need to reduce the traction roll. It is definitely a good idea to go to harder tyres. I would even suggest the Sorex 36R with medium inserts. Also, try adding some super glue to the outer edge of the tyres from the rim to about a mm below the tyre surface.