XRAY - Model racing cars

RocketRacer,

I believe all those parts, besides the Aluminium Shocks will work. The T2 '007 Shock Bodies are 2mm Longer than the T2 '008 Shock Bodies, so you have two options, you can purchase:

XRAY T2'008 Alu Shock Absorber - Set (2) x2.

Or

Alu XRAY T2'008 Shock Body (2) x2.

When going with just the Aluminium shock bodies, you will need to disassemble your current shocks, and install the Shorter Aluminium Body and Shorter Shock shaft.

Whereas, with the T2 '008 Aluminium shock kit, you may keep your T2 '007 Shocks together, and the new Alumium shock kit will contain everything you need to build your T2 '008 Aluminium Shocks.

Also with your aluminium rear Uprights, you may find that they either have 1 or 2 deg of outboard toe. The T2 '008, with kit setup runs 0 deg outer hubs, and all your toe comes from inboard. So in your case, you could probably use your hubs, but you would have to decrease your inboard toe, by removing rear Shims, from the Suspension Block or applying Shims to the Front Suspension Block, in order to achieve the kit 3 deg toe in.

I hope this helps,

Kind Regards,

Ryan Maker.

perfect...thanks for the help guys!!