XRAY - Model racing cars

I'm feeling that my car has low steering :S

I am thinking of cutting the c-hubs like they were used to do on the EC.


I'm using 5 5 3 in the diffs so I think that it isn't a diff problem, but a steering problem.



What can I do to improve steering ?

You can't be serious. I find the steering on the 808 just insane.

I assume you are talking about the 808.

Do you find the car to have low steering into the turn or out of the turn. Maybe you could post your setup? Steering should not be a issue on the 808.

Of course I'm talking about the 808 lol.


It has super low steering entering corners. I have to slow down a lot, I'm MUCH faster with the previous EC than with this new 808

I suggest you try the basic setup for the 808, steering should not be a problem on that setup. If you still find the car to have low steering entering a corner I suggest you try other tires.

WOW thats a first what sort off toe out are you running on the front and as sturla said what tires are you useing? Maybe check your end points aswell.

Craige

check your servo saver is tight..it could also be too much rear end grip maybe?

as said..the 808 is super tight on steering.

That is kinda crazy dude! Make sure your servo saver didn't loosen up. when I built my 808 I wanted to make sure I got the spring tension right before I hit it with the loctite and guess what.......I forgot and it came loose in the A main and I didn't finish!

Don't take this the wrong way. But you do have the c-hubs on the right way?

I think you will find is the problem is with the tyres i had the issue of no steering once and found it to be the tyres gave to much grip i changed the tyres went back out and the problem was sorted

Cheers
Chris