XRAY - Model racing cars

I run a 38T gear in the front diff

can I put a 43T truggy gear in the rear
to give even more frontdrive
or what would that do ??

Intresting! hey guys, i've tried different setups, diff oils etc. and have gotten the EC to handle better but it's still twitchy is this the problem you guys were having?

[quote="rcjunky10"]If you look at Ryan Lopez's setup you will see that he is running truggy gears throughout his buggy, i.e. 43/10 crown/pinion, and on the clutch bell/spur gear 16/44.

for the change i would need:
2 43t crown gears
2 10t pinion gears
1 16t clutch bell
1 44t spur gear
that should be every thing right? thanks guys!!

i'll be using a stock v-spec

mike that is correct and until the xray clutch bells in 16 and 17 are availible racers edge makes a cheap alternative that last pretty good. i think they are only 11 dollars for one

hi leon, thanks for the quick reply! since i run the truggy too i should have almost everything i need. what diff oils are you guys running? i'm currently running 7/5/3

thanks!