XRAY - Model racing cars

ok i got my new kit i see alot of people say to get this and that
can someone tell me what extras i need to get ?
1 need to do away with e clips
2
3
4
5
and what else i have to have this done by next saturday so i need it fast please ?

If you wanna do away with the e-clipsd then get the front and rear TQ/EC hinge pin holders.

- 35 2300 for the complete conversion. Has hingepins, hingepin holders, bushings, etc.

- adjustable engine mount 35 8712 for Novarossi type or 35 8713 for Picco type engines.

- Get yourself another body. The stock one doesn't last very long at all.

- front and rear arms of course and inner and outer hingepins

- Get the ALU braces for the front and rear too if you can.

That's really about it. The truggy is wicked man. The ALU hubs for the front and rear are nice too. The only thing I've broken was an arm and hingepin in the same very, VERY bad crash. That's it. Enjoy your XT8. It's a top of the line truggy!

regards

speed metal

First things i did with my XT8 was the following.

ISS KIT
engine mount 1 piece

put an extra screw in the front body mounting posts ,the small locating lug can snap off so drill right through and either screw or bolt it . it has been the only issue i have have had with the truck .

need TQ and EC or just 1 of them for the xt8 ?

Get the rear aluminum brace asap! also get a couple of extra pinion gears.