XRAY XB8 TQ, EC, 808 ---Buggy General Forum---

sturla · **Posted:** Thu Sep 23, 2004 12:39:32

Should there be some slop up and down on the servo saver unit? Mine has about 1-2 mm I think

BuLLdoGG · **Posted:** Thu Sep 23, 2004 16:06:10

Between the servo, servo-saver and all the ballends, this can mount up to quite a bit of play, so I shimmed mine a bit.
But if you need to shim be carefull not to use too thick a shim or the servo saver will bind up.

Cara · **Posted:** Mon Sep 27, 2004 12:53:00

grahama89 · **Posted:** Thu Sep 30, 2004 18:01:34

I made this Vid of us throwing the cars around, a mates Hyper 7 and my XB8. We did this for 12 hours over the weekend and all I could break was the rear R/H upright and The front left Lower arm. Neither failure affected the handling or stoped the car from being driven. They really do take some punishing before they get knocked out.

BuLLdoGG · **Posted:** Thu Sep 30, 2004 18:46:47

The link is incorrect.

Venom · **Posted:** Fri Oct 01, 2004 17:28:28

Niklas · **Posted:** Fri Oct 01, 2004 17:36:23

Venom · **Posted:** Fri Oct 01, 2004 19:03:30

Venom · **Posted:** Fri Oct 01, 2004 19:14:11

Tracks such as this is where a torsen really shines!!!!!!

Venom · **Posted:** Fri Oct 01, 2004 19:17:18

Or tracks such as this

Booyah · **Posted:** Fri Oct 01, 2004 19:40:17

WOW look at those jumps!! Get some sick air off of those for sure!! Very nice tracks too

Venom · **Posted:** Fri Oct 01, 2004 22:01:17

LOL as funny as it may sound, you actualy want to get as little air as posable. :lol:

But it is fun to watch some guys go Nuts and try to land in another state. :shock:

XRAY - Model racing cars

XRAY XB8 TQ, EC, 808 ---Buggy General Forum---

Who is online