I don't have a photo, but here's what I did...
Drill all the way through the screw hole and use a longer screw with a lock nut on the back (Some people use a washer, but I haven't found the need to). Cut off the little 'nipple' that locates into the shock tower and drill through, making sure it's parallel with the other screw hole. I couldn't fit another screw in there as the head interfered with the other one, so used a long grub screw (the one used with the ball ends on the roll bars), and screwed it in until it was flush with the front of the tower.
Hope that helps!
|