XRAY - Model racing cars

Hi (back) last week i've checked all the car, and all parts seems ok ,
i putted the basic set up for carpet exactly the same ,checked my toe in in front , and all degrees are ok : always the same thing !
no tweak ... checked
I ve found that my car is not equally balanced ! more heavy to motor side

futaba 1024
ko vf1
servo ko 1015

what can i do?
i want to install a BL , and it's more heavy !! (will be always the same side !) it will be worse
is there a way to setup the car (shocks or springs differently ?)
see also , that at less power , it's the same .... a friend checked my setup and all seems ok for him (no tweak,same spring/shock toe ,...)

Hi again,
yeah, just get the balancing tool of Hudy (costs about 7 Euros). You'll need a flat surface to setup it correctly.
You can put the weights pretty everywhere on the side you need them (you said your electronic side is heavier so you should put them on the battery side logically^^). e.g. behind the motor, in front of the battery, perhaps - if the difference is not too big - slightly left of the centerline of the chssis (would be best).

Tell me: which battery do you use ? Normally theres no big difference between the left and right side of the 007 chassis.

Hope, I could help you.

Regards,
Pat.