XRAY - Model racing cars

well about 8 hours later my xt8 is finally complete . my complements to the directions, very easy to understand. i did spend extra time than needed to build, being this was my first xray product and i wanted to make sure everything was perfect ,unfortunatley now i have to wait 3 weeks till the next race at silver state in boulder city <that> maybe a quick trip to the nitro pit in az. is in order . if this things runs as good as it looks it should be a blast. i did notice a couple interesting facts in the build as in same diff fluid front and rear same weight oil in the shocks front and rear and spring rates front and rear very different from a majority of other brands

does anyone have a part number or info for the replacement cvd pins.ive measured the hellfire ones and they're approx 1mm too short.
what you using guys ???
thanks in advance.

i had asked this in the XT8 part of the forum.

180 booker wrote:
wondering if anyone knows where i could purchase part number 98 0264 pin 2.5x14? they are the pins that hold the CVD together. lost one just before my main yesterday and need to get some replacements. checked b-main and team helotes and do not see them listed on either of there sites.


Stormer Hobbies has them in stock.
https://www.ssl-stormerhobbies.com/cgi- ... =XRA980264

I red Loctite'ed the setscrew for mine, and put some shrinkwrap over that section of the CVD in hopes that if the setscrew does come loose, that the shrinkwrap will help hold the pin in place.