XRAY - Model racing cars

Hudy do a nice one

http://www.hudy.net/xhudy/products/prod ... tegoria=65

works for the xb8 as well

A one of a kind Hudy design for a pair of pliers or ?? to hold the shock shafts firmly, without scratching the shafts, while servicing the shocks. (changing out rod ends, changing pistons without having to dissasemble the shock or disturb the seals).

on-road/off-road design maybe.

I have a pair of Linesman pliers that I have tool dipped the jaws on but the tool dip coating is to slick.

I would like to see a nice tool bag to hold all of our nice Hudy tools. Similiar to the GS or Integy.

ok here goes , trying to learn some new combo jumps iv been sore on the shell well 3 to be exact and i know im not the only one.they keep splitting at the front edges behind the front body mount . could we have another mount that fastens to the screw on the plate to front brace so it comes up between the front mount and the windscreen of the shell to stop it from flexing there ... if it was round with the fastning screw going down though it and screwing into the front brace hope this makes sence if not ill do a pic

Drill a hole from front to rear in the front body mount so the body clip runs betwween the shock tower along the body & you'll never split the body there again

I'm still praying for Xray carbon clutch shoes to be announced. Also I would like 4 or maybe even some 6 hole shock pistons.

On the new EC we need:

carbon clutch shoes

4 hole pistons.