XRAY - Model racing cars

I've been running my FT chassis almost as kit, excepf for the following changes:-

2 holes open in the front pistion, three in the rear.
Dark blue springs on the front.
Front ball diff.

What inserts are you running? My car goes well with Yok medium (part #038M) inserts and inch up rims to stretch the rubber out a bit.

If you find this hooks into the corners too much, have the front shocks more upright and incline the rear ones. Also try to angle the front camber link more, or even wind half a turn extra on all four droop screws.

Hope this helps,

James