M18 PRO first impression

dustie · **Joined:** Tue Dec 20, 2005 22:23:25 **Posts:** 5

Got Mine Wednesdag it realy is a good kit, tommorow im going to the track for a track test

kant76 · **Posted:** Sun Dec 10, 2006 10:36:55

acsubie · **Posted:** Sun Dec 10, 2006 23:40:20

blsdmf · **Posted:** Mon Dec 11, 2006 21:33:45

kant76 · **Posted:** Tue Dec 12, 2006 03:42:49

today I have builded and tested my M18 PRO. here are my opinion.

I took my time building it an made 100%sure that every thing, was fitted correctly and that all those littel things sticking out from the molds was cut of and left with at smooth surface. well the assambly went stright ahead and I only glansed at the manual when I had two 3m screws on spare when I was finsih building. well after having build more than ten cars from the M18 series and nt18, it was pretty easy and straight forward.installed a mamba 4200 brushless motor system, and there was no need for grinding on the motor mount. found a fault in the supplyed documentation, the messurment on the toe sheet are way off hope that xray will correct this in newer versions of the kit´s caus it could realy confuse a first time builder.

charged 1 pack of batterys and vacumed my track in my work shop.
and wow..... this littel thing is Evil... wth the capital E.....

Xray have don it again, I thought that a my old m18 mod was a good handeling car but not compared with this .... it ripes, shaved 0.9 sec of my previous laptime record after just 10 laps. cant wait to get my hands on the alu options for this thing. it is with out a doubt bedst handeling 1/18 onroad car in the world

Great job Xray Keep it up....

blsdmf · **Posted:** Tue Dec 12, 2006 06:33:28

Have you ordered them from xray direct or somewhere else???

kant76 · **Posted:** Tue Dec 12, 2006 11:26:20

bought mine at www.rcmodel.dk my lhs

JC Borcy · **Posted:** Wed Dec 13, 2006 00:16:40

I recived my today so the real testing starts saturday in local race.

here is some photos "how it is made" :wink:

So good luck with yours models :lol:

BORUT (Slovenia)

kant76 · **Posted:** Wed Dec 13, 2006 02:04:13

got finished with my PRO last night. today I had the plesure of driving it on our finest inddor track in denmark. and WoW this is eaven better than what I have imagined, this thing drivese awsome straight out of the box. I compleatly owned the track. the stock m18 fled at the sound of my racer ripping down the track, and leaving them in the dust. after a few laps I did some minor setup on the down stops and this just pushed the performance to an eaven higher level. one m18 mod vas also at the track he had about 40 sec of runtime b4 I lapped him again.
what can I say Xray have done it again.. this thing is awsome, and every body who race 1/18 should try this, caus onbce you have driven it you cant go back....

nice job xray keep up the good work. are looking forward to see what options you have planed to release...

kenn

harder · **Posted:** Wed Dec 13, 2006 23:06:07

kant76 · **Posted:** Thu Dec 14, 2006 00:55:58

rugzilla · **Joined:** Tue Mar 22, 2005 16:09:55 **Posts:** 46

JC Borcy · **Posted:** Thu Dec 14, 2006 17:10:53

Mini_Me · **Posted:** Thu Dec 14, 2006 17:51:47

rugzilla · **Joined:** Tue Mar 22, 2005 16:09:55 **Posts:** 46

kant76 · **Posted:** Thu Dec 14, 2006 22:33:17

it´s the hardend spur that follow the car, I have heard of this problem but that it only existed on the oldversion the spur with out the H stamped in ti.

heres a coupel of pic of my creation..

JC Borcy · **Posted:** Fri Dec 15, 2006 03:04:01

Mini_Me · **Posted:** Sat Dec 16, 2006 23:06:31

XRAY - Model racing cars

M18 PRO first impression

Who is online