XRAY - Model racing cars • View topic - My flywheel cracked. Are the newer flywheels anodized black?

View unanswered posts | View active topics

Board index » XRAY KITS » XRAY XB8 | XT8 | 808E | XB9 | XB9E | XT9

All times are UTC + 2 hours

My flywheel cracked. Are the newer flywheels anodized black?

Moderator: ChrisP

Page 1 of 1

[ 18 posts ]

Print view

Previous topic | Next topic

Author

Message

Dave_D

Post subject: My flywheel cracked. Are the newer flywheels anodized black?

Posted: Fri Nov 19, 2004 18:38:37

Joined: Sun Sep 19, 2004 16:19:46
Posts: 44
Location: Philippines

Top

brano

Post subject:

Posted: Sat Nov 20, 2004 10:42:10

Joined: Fri Sep 10, 2004 05:52:13
Posts: 1354
Location: Trencin, Slovakia

Yes, these kind of flywheels are from an another batch which are the ones that the pins will not come out.

The production has been again changed and the other batch of flywheels will be again standard but of course the pins will not come out.

Top

Dave_D

Post subject:

Posted: Sat Nov 20, 2004 16:04:15

Joined: Sun Sep 19, 2004 16:19:46
Posts: 44
Location: Philippines

Thank you for the clarification.

Top

David Joor

Post subject:

Posted: Sun Nov 21, 2004 06:05:37

Joined: Tue Nov 02, 2004 18:05:19
Posts: 535
Location: Austin, Tx

Last edited by David Joor on Sun Nov 21, 2004 17:30:35, edited 1 time in total.

Top

mawheele

Post subject: What should we do?

Posted: Sun Nov 21, 2004 10:41:32

Joined: Sat Sep 18, 2004 23:22:20
Posts: 95
Location: Hampshire, England.

Top

fearsome

Post subject: Re: What should we do?

Posted: Mon Nov 22, 2004 08:01:55

Joined: Mon Sep 20, 2004 13:22:37
Posts: 31
Location: Australia

Top

David Joor

Post subject:

Posted: Mon Nov 22, 2004 17:12:16

Joined: Tue Nov 02, 2004 18:05:19
Posts: 535
Location: Austin, Tx

Top

z-man

Post subject:

Posted: Mon Nov 22, 2004 17:55:33

Joined: Sat Oct 02, 2004 16:15:25
Posts: 655
Location: KEWANEE IL.

Top

atm92484

Post subject:

Posted: Mon Nov 22, 2004 20:11:12

Joined: Thu Sep 09, 2004 04:11:34
Posts: 49
Location: Pittsburgh, PA

Top

Booyah

Post subject:

Posted: Mon Nov 22, 2004 21:38:23

Joined: Thu Sep 16, 2004 06:58:34
Posts: 321
Location: Anchorage, Alaska

I just spoke with rcamerica and they have not heard of any new flywheels yet??

Top

brano

Post subject:

Posted: Tue Nov 23, 2004 07:53:43

Joined: Fri Sep 10, 2004 05:52:13
Posts: 1354
Location: Trencin, Slovakia

Top

Booyah

Post subject:

Posted: Tue Nov 23, 2004 08:55:43

Joined: Thu Sep 16, 2004 06:58:34
Posts: 321
Location: Anchorage, Alaska

Top

showtime

Post subject:

Posted: Tue Nov 23, 2004 09:27:02

Joined: Fri Sep 10, 2004 07:58:27
Posts: 244
Location: London UK

Top

fearsome

Post subject:

Posted: Tue Nov 23, 2004 14:32:50

Joined: Mon Sep 20, 2004 13:22:37
Posts: 31
Location: Australia

Top

Dave_D

Post subject:

Posted: Tue Nov 23, 2004 19:28:51

Joined: Sun Sep 19, 2004 16:19:46
Posts: 44
Location: Philippines

My 2 cents,

I think it's gonna be the same as with the pistons... go through the proper channels.

In my case, I sent it to the LHS where I got my kit and it's his job to contact where he got his stock from and so on and so forth.

As with most consumer products, I don't expect the factory to deal with every owner on a 1 to 1 basis, that's what distribution channels are for.

Top

fearsome

Post subject:

Posted: Wed Nov 24, 2004 06:52:08

Joined: Mon Sep 20, 2004 13:22:37
Posts: 31
Location: Australia

Top

Dave_D

Post subject:

Posted: Wed Nov 24, 2004 09:02:12

Joined: Sun Sep 19, 2004 16:19:46
Posts: 44
Location: Philippines

Top

mario

Post subject:

Posted: Wed Nov 24, 2004 12:01:58

Joined: Fri Sep 03, 2004 11:22:56
Posts: 2497
Location: Trencin, Slovakia

Top

Page 1 of 1

[ 18 posts ]

Board index » XRAY KITS » XRAY XB8 | XT8 | 808E | XB9 | XB9E | XT9

All times are UTC + 2 hours

Who is online

Users browsing this forum: No registered users and 55 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum