i have just bought the t2 (what a car ) and ran it for the first time on wednesday 31st may ...
found the car to be a little unsettled pushing on power round longer corners and of power loose ...
i have now reshimmed the rear to run 2.5 deg toe in and also reshimmed the front with 1.6mm shims to toe out the car is totally different i can now get the car to go full power full lock (6 - 7 foot circle )on carpet with no push or over steer totally predictable now.
i also found that with the one way in the front there was off power over steer on corner entry this was due to the motor braking when off the throttle. to get round this i moved the throttle trim slightly forward but not far enough that the car crept forward on the line stationary. this cured the problem totally ( heavy springs in the motor)
totally dial in car fantastic product xray all the way
http://www.teamxray.com/xforum/xform/in ... 5&setup=t2