XRAY - Model racing cars

Hi,

I'm racing Foam on carpet. I'm having problem finding steering for my track. We have a 180 deg corner at the end of the strait and the track is technical. Looking at many setup, they all seem to have a big difference between front and rear springs. I guess it depend on the track. But anyways, No mater what I do, I can't get the steering I need to take tight corners and drive aggressivly.

My last change was to change the toe from 2 to 1.5...

I know it probably won't fix my steering but since the traction is high I was thinking harder spring all around, the front seem to dive too much.

So What is next?

Here is my latest setup
http://www.teamxray.com/xforum/xform/in ... 7&setup=t2

The one before
http://www.teamxray.com/xforum/xform/in ... 6&setup=t2

Thanks

Toe-out at the front of the car worked realy well for me. though it was on asfalt with rubber tires. i guess you should try it. maybe put the quick rollcenter at the front in position 3, you'll get a lower RC, more roll and more grip. maybe you need to lower the downstop further.
also you could place more weight on the front of the car since it is in the center right now..
hope i helped...

Mark

Juane yes, move inner post to the back of the car, leave the arms mounted to the rear hole on the steering blocks.

Markiempje: I already have some toe out, I dont think having more than that would be any better. I like the Idea of the weight, Will Do


CoryCraig: Thanx man

im still thinking,
what about more holes open in the front dampers?
you want more agressive steering right ?

can you state in with part of the corner you're lacking front grip? or is it just overall lacking...

Cheerz
Mark

Well it seem to be more corner exit, on power.

Thanks for your feedback, I'll try everythings!

for one power steering especially high sped corners tae droop out of the front.