XRAY - Model racing cars

Hi Andy this is Doyle,

how was the car wednesday? I have the car built now so i will try mine Friday! Did you solve your problem? If not I would try switching from the CS22's to Sorex's, they seemed to solve my problem with my old T1R. I have just read someting on here about Anti Sqaut and Pro Squat?! What diff are you running? I am using the standard one way, what would anyone recommend (Never used a one way).

Hi Doyle, the car is incredible but need to find some more rear grip. As you found yourself you get oversteer on power out of corners.

I have tried stock setup which is good, but as you know the traction at friday;s club is not that good as we get on a wednesday.

I was thinking of firstly making ride height front + rear the same at 5.5mm to help with the weight transfer or soften the rear so it's 5mm the same as the front, hence this will soften the rear and again help with the weight transfer.

The other consideration is to lower the front droop to perhaps 4.0 again to get more power to the rear. Any one else get any good sets for 19T motors on a medium traction carpet with soreX 24 typres

[/img]