XRAY - Model racing cars

Peter, You may want to check your information before you post with such conviction. I own an RC company and could care less who owns the product if it is our fault we fix it.
Carbon doesnt tweak unless it is REALLY beat and even then it would be hard pressed to show signs of tweaking.Our companies main products are Carbon and I am 100% sure what the issue with the chassis is.

ANYWAYS!!! Lets get back to why I am here..
I am not here to complain or get half cocked responses, I am here to get information, if you cant help then there really is no reason to post.

Anyone willing to offer some advice please feel free, those with nothing better to do than change the direction of this thread please dont.

Thanks,

Clayton

I have seen this problem was already addressed by emails.

what was the out come instead of us all wondering?

Xray is dealing with the issue

Clayton

ah just a reminder on the tweak issue.....make sure your top plate is on correctly while building the car i missed it....the bearing cap needs to be on the right hand side

Steve

T1FK05:

I'd just like to ask for someones opinion on this problem I'm having.

When I setup my car I check for a tweaked chassis on the 10mm hudy blocks prior to fixing the shocks to the shock mounts. I don't usually have any play on the chassis but when I do it's just a slight bit. I unscrew my adjustable top-deck and bend the chassis slightly until there's no more play. Screw the top-deck back on and check again, always ok after that.

I mount the shocks and all electrics (batteries, motors etc) and then proceed to setup the car. When it comes to the hudy tweak station I always and I mean ALWAYS have to adjust the rear shocks with a big difference between them, but front alre always ok. Is this normal???

Thanks,
S