XRAY T2

bigb · **Posted:** Sun Feb 12, 2006 02:13:43

Can anyone help me with finding a starting point in pinion size. I will be using a 84t spur, racing with stock motors.

garynjr · **Posted:** Sun Feb 12, 2006 06:18:28

garynjr · **Posted:** Sun Feb 12, 2006 06:32:42

bigb · **Posted:** Sun Feb 12, 2006 19:41:36

cbcbcb · **Joined:** Sun Oct 17, 2004 20:02:59 **Posts:** 28

Hi

The set up sheet which came with my T2 gives the quick roll centre position for the front upper camber links as position 1, but the online version says to use position 2. Which is the correct/intended setting to use?

Thanks,
Charlie

CoryCraig · **Joined:** Fri Jan 13, 2006 04:39:11 **Posts:** 131

olly · **Posted:** Mon Feb 13, 2006 11:01:23

Investmentsunlimited · **Posted:** Tue Feb 14, 2006 05:25:05

Just wanted to ask why Paul L. has not posted his setup info? I am new to Xray, and would like to see his setup. Does he not do this?

CoryCraig · **Joined:** Fri Jan 13, 2006 04:39:11 **Posts:** 131

Sailfish · **Joined:** Thu Sep 09, 2004 15:13:10 **Posts:** 67

My upright was damage this weekend and i didn't have a spare, what i did was use the alu 1deg from my 05KIT and had to shim it a bit but it worked, now have anybody tried this? i will not be able to try it until this weekend so if anybody tried this setup please LMK what was the outcome.

Peter Szuhai · **Joined:** Mon Sep 13, 2004 11:50:49 **Posts:** 257

Investmentsunlimited · **Posted:** Wed Feb 15, 2006 03:45:43

teamgp · **Posted:** Wed Feb 15, 2006 15:36:36

britracer · **Joined:** Mon Dec 26, 2005 06:35:23 **Posts:** 14

ChrisP · **Posted:** Wed Feb 15, 2006 17:01:49

He was also using driving skills that are not available to us mortals either...

Paul's setups seem to trend to the untraditional...at the US indoor champs where traction comesup to the point where many believe that it is impossible to race without stiffening the car up as much as possible, Paul won it using a 2mm chassis....but a wide top deck and standoffs?

I'll bet you a dollar that he could make the stock chassis work as well... :wink:

CoryCraig · **Joined:** Fri Jan 13, 2006 04:39:11 **Posts:** 131

I remember when i used to race for Hyperdrive, and PTI, bouncing from one race to the next, was rather rough. Leave one race, get home, and start trashing to prep for the next. Time was very limited and even then i felt unprepared. Im sure Paul has his reasons for not posting those setups, as not many of the team drivers have. These guys are under ALOT of stress, and go through alot of things most of us dont realize. Just be patient and the setups will slowly trickle onto the site. I try to post mine as soon as possible, but i have alot more time on my idle hands than some of the team guys. besides, my setups arnt as sought after as PL's or RB's ect ect...

In all honesty i have noticed most of the team guys have alot of the major setup options the same, they just change a few minor things here and there to suit themselves. Alex Lopez and Peter Robinson have both posted thier setups and they are very similar. I wouldnt be shocked if Paul's, Raulph's, Mike's or Jilles is too far off of thiers. Im sure you cant go wrong with either Peter's or Alex's setups as a starting point untill your prefered driver posts his personal setup.

JohnMatrix · **Joined:** Wed Jun 08, 2005 11:37:38 **Posts:** 13

I thought this was pretty cool. I'll be wearing mine at the ROAR Nats in Stockton.

The Team Slovakia Hockey Jersey

mario · **Posted:** Sat Feb 18, 2006 15:06:14

britracer · **Joined:** Mon Dec 26, 2005 06:35:23 **Posts:** 14

XRAY - Model racing cars

XRAY T2

Who is online