XRAY - Model racing cars

twigstoy, definitely lengthen the rear camber link (mount it to the outside hole on the rear hub carrier). It will make a world of difference.

wow 2deg rear toe... what kinda surface? on loose dirt 2 deg is terrible for me... rear fishtales like crazy.

Thanks for the replies guy's. Slim, would 3 degree rear toe be better on a slick track? Im not used to all of these adjustments. I'm used to a Mayhem.

oh yea! i did lots of testing on a slick track.

2 was nice for ducking into a corner, but i like to get in the gas a bit early, i like 5k in the back, and it was goosy with 2. im now on super high bite, and run 2.5. one time i ran 4 this summer because the track was suppa loose.

i have a set up sheet for a slick track for :newberrys: check that.

The problem I have is the rear just is not planted. I thought the thicker the rear fluid, the looser coming off would be. I will definatly try these set ups to see. Thanks for the info guy's. That's why I bought a XB8.

I'll put my two cents in here to see if I can help. First use the Xray oils so you can match what everyone else is doing. Second try searching the setup sheet database to find a team driver setup that matches the type of track and surface you race on regularly. Then use that as a starting point and work from there. This has helped me tremendously.