Lower 0.75mm Eccentric Suspension Holder

Dave Treacy · **Posted:** Sat Oct 08, 2005 01:09:00

I've just got hold of these and just want to confirm that they are installed as a direct replacement using the middle holes on the rear bulkheads...

True?

vadn1 · **Posted:** Sat Oct 08, 2005 01:48:56

polesitter61 · **Joined:** Wed Apr 06, 2005 22:35:32 **Posts:** 62

dnte5 · **Posted:** Sat Oct 08, 2005 04:12:06

Eyeball · **Posted:** Sat Oct 08, 2005 05:57:07

littleal · **Posted:** Sat Oct 08, 2005 10:11:53

teamgp · **Posted:** Mon Oct 10, 2005 17:00:17

Dave Treacy · **Posted:** Tue Oct 11, 2005 14:30:15

OK, me confucious with the responses... :cry:

At the moment we are running the kit ones in the middle holes. If I put the .75's in the middle holes then the roll centre will be lowered, but if I out them in the top hole the roll centre will be raised (from my current position)?

If this is the case, what are the benefits / disadvantages for both settings...or should I stay as I am. I initially thought that they were to be used with the middlle ones as you cannot fit the kit ones ot the lower holes due to the design of the chassis...

fulcrum2 · **Joined:** Sun Dec 05, 2004 18:20:17 **Posts:** 77

How about lowering or raising the roll center just a little bit? Smaller steps?
This is probably the reason for the new holders.
Or adding just a little bit of anti dive or kick up...

teamgp · **Posted:** Tue Oct 11, 2005 17:32:21

Eyeball · **Posted:** Wed Oct 12, 2005 02:09:03

vadn1 · **Posted:** Wed Oct 12, 2005 04:33:50

teamgp · **Posted:** Wed Oct 12, 2005 15:21:05

projectnmt · **Posted:** Wed Oct 12, 2005 19:19:08

teamgp · **Posted:** Wed Oct 12, 2005 20:17:34

Mark Christopher · **Posted:** Thu Nov 10, 2005 12:57:04

team gp
you use em front and rear or just rear?

teamgp · **Posted:** Thu Nov 10, 2005 18:18:05

Mark Christopher · **Posted:** Thu Nov 10, 2005 20:28:40

i understand they can do both, have ordered 2 sets to try

drsfly · **Joined:** Tue Apr 05, 2005 21:52:35 **Posts:** 6

Sailfish · **Joined:** Thu Sep 09, 2004 15:13:10 **Posts:** 67

XRAY - Model racing cars

Lower 0.75mm Eccentric Suspension Holder

Who is online