hi ncfc keith, the problem could be that the rear springs are a bit too soft, this may sound strange to others but as you know (norwich) i worked out were you are is very high grip, what could be happening is as the car enters the corner the tyre creates more grip than the spring can handle, thus causing the rear of the car to collapse. try going up to a white spring. if not, mount the inboard rear wishbone pivots in the top holes, then put a 2 mm spacer under the ball joint on the wheel end of the top link, this will make the car safer going into a corner, and give you more steering coming out.
another thing to check is rear droop, try setting it to 2mm on hudy droop blocks, also run the chassis at 5mm, you will need to check this each time as tyre wear on minipins can change alot in a run.
|