XRAY - Model racing cars

wot can i change on the set up to make it less taileeee

and wot shood i change if i use the 2mm chassis

http://www.teamxray.com/xforum/xform/in ... tup=t1fk05


thanks heaps for your help

Daniel

you could try 2.5, or 3 degree of rear toein.

or possibley try 2 holes open on the rear piston.

Try shortening your wheelbase if Matt's suggestions don't help enough.

Try softening the rear springs or/and move the rear shocks in a hole both top and bottom. If this doesn't fix it try the opposite on the front (stiffen the front springs and move the front shocks out a hole both top and bottom). Drew.

thanks heaps guys ill try it

on the wheel base i have a 3mm in front of the arm and a 1 mm behind and that is 257or 258

Try a solid 1 way as it is a slightly less aggresive as a 1 way, move the front shocks out and open another piston in the rear shocks, and if it is still a little bit 'tail happy' try 2.5* of rear toe in or 3*.

Charles