XRAY - Model racing cars

Another thing to look for when running a spool is wear on the plastic blades that are the end of the front CV shafts. Mine only last about two full race weekends with a 19t motor before they become sloppy or just plain wore out.

Ifound when i put the spool together, i made sure the slot for the driveshafts lined up the same on each side. You will get a little bit of chatter still as you are trying to make the car do something it dosnt want too.

Thanks, I knew there would be some chatter but this much would cause my car to spin randomly. Just double checking and it did it so much it caused a cvd to bend.

I will try aligning my shafts to see if this helps.

Thanks for all the help.

DM