I have found that the 05 at my track likes the softest setup. Smooth asphalt I have been running the springs that come with the kit. As it was said before... if you need more steering lay the front shocks in one more hole or open one more hole in the piston. I do not like running too much bias front to rear so if it was me I would try those things first and if that still didn't work I would do
1) Stand the rear shock up 1 hole
2) Rear sway bar
3) Bring caster down one notch... for example instead of 3 degrees try 1.5
4) And last but not least if you are running a front sway bar take it off or decrease.
P.S. I just thought of something, all of this info is in the hudy set up guide that comes with the xray. One tip that isn't in there can be found in the XRAY tips and tricks section. It tells you about taking the stand off's off. And removing some screws from the top deck and bulkheads. Just my 2 cents but I hope it helps. Oh I have ran a stffer spring in the rear before but it never felt predictable to me.
![Wink :wink:](./images/smilies/icon_wink.gif)