XRAY M18T General Forum

Thomas P · **Posted:** Thu Oct 29, 2009 21:29:12

A useful tip

reinforced arms...they WILL hold much better...

"Bearthread" CA, and last epoxy...do not overthight when reaching the "Y" on the arm, it will cause "bind"

jermpool · **Posted:** Sat Apr 03, 2010 20:08:50

Mini_Me · **Posted:** Tue Apr 06, 2010 14:13:44

It helps keep the steering knuckles from moving to far an angle and binding/locking the system.

jermpool · **Posted:** Tue Apr 06, 2010 23:01:33

Thank You

f1n3sse · **Joined:** Thu Dec 02, 2010 08:25:06 **Posts:** 12

you don't need to put those 7mm spacers on the bottom of your steering knuckles if you set your epas correctly

f1n3sse · **Joined:** Thu Dec 02, 2010 08:25:06 **Posts:** 12

Does anyone have a small list of 2s lipos that will fit the m18t without chassis modification? I have 2 brand new zippy 2s 40c 2200mah packs that are a bit too big. I'd like to not have to dremel the side wall off of the new chassis if possible but am looking for the highest capacity lipo at 30c or higher that will fit. any suggestions?

TpParts RcXtreme · **Joined:** Tue Jun 18, 2019 06:42:41 **Posts:** 5

I took out one of the 2 M18Ts.. ( 1/18 and the other is a 1/16 )

But cant find what oil in shocks to be used..dont remember.. tarmac, mini pin tired

EmmaDavis · **Joined:** Thu Oct 17, 2019 14:01:34 **Posts:** 9

Facing problems in JioFi login?

Simply open any browser and enter and then simply click on login button and use administrator as username and password and this way you can simply login to JioFiLocalHtml.

XRAY - Model racing cars

XRAY M18T General Forum

Who is online