Hello everyone,, At step 4, when i tighten the lower mount screws to the chassis from underneath, there seems to be no ability to adjust the mesh.
I can only tighten the screws, and there isn't any play, and everytime i tighten, the gears are always set too tight.
Then when i blip the throttle, the drivetrain, not under any break, just slows and stops, without free wheeling, because i think the gears are set too tight, and i think they're giving a slight hum/rip sort of sound.
Please help on how i can loosen things up on the gear mesh side of things. I can't see how any of the steps allows me to loosen the mesh...
thanks
|