XRAY - Model racing cars

Hey everyone, I just got a used T1 FK05 and I am planning on running it on carpet with rubber tires (VTA stock racing). I was curious what weight oil I should be using in the shocks front and rear, what shocks front and rear (as far as stiffness) and maybe droop settings if that makes enough of a difference to be noticed in a stock class.

The track I am running at is small with sharp turns and the carpet is new and very sticky. There is one small bump at the end of the straightaway going into turn one, if that matters at all.

Thanks!

You will want to try and get it as low as possible.. all around to reduce roll.

everything low on the chassis, and reduce your droop as much as you can. good old 5 / 6 is a good start.

350-400 cts - maybe more to 400 the older shocks might need more.

xray springs 3.0 front and 2.6 rear. You will be fighting chassis roll. all the newer chassis are lower and less travel.

James

download kingoroot apk[url]


You will be fighting chassis roll. all the newer chassis are lower and less travel.

Nice compilation here! Thnx for sharing.