XRAY - Model racing cars

Hi All
I am looking for a 13.5 setup for Stafford in the UK, Hopefully Zak Finlay will share his. For those who do not know the track it is a low grip tarmac. I had my best results with the 14 car with a 2mm chassis but cant seem to find a 16 equivalent, I have seen a couple but they are described as "hard" which kind of defeats the object (unless someone tells me different)
My current set up is
xform/index.php?act=view&ID=637&setup=t4_2015
Regards
Kevin

Whilst my last attempt at a setup for Stafford was utter crap (I've only raced there twice in 10 years, and the last time was at least two years ago) I would start by spacing the top deck up 1mm so it clears the layshaft mounts and only use the screws at either end of the top deck.
This has almost become a standard setting for team drivers as the extra flex increases traction.

I would also test with different width hex's and perhaps reducing your front droop to try and reduce the inside front grip a little entering the corner.

[quote][/quote]
Cheers Skiddins. I will give that a try tonight

Hi Kevin,

Here is my Setup from the BTCC round at Stafford:
xform/index.php?act=view&ID=449&setup=t4_2016

Hope this helps!

Regards,
Zak